Single hand wrist strap monitor

product description:

OTS-LOM loop on-line tester, real-time equipment ground connection. In the equipment grounding circuit failure or equipment shell due to poor grounding when the induction voltage sound and light alarm. Product small size, light weight, intelligent monitoring, easy to use. Can accurately monitor the equipment ground wire loop connection status, which can ensure that the anti-static (personal) work area on the system grounding requirements.

Product Specifications:

Working environment: Temperature 0 ℃ -50 ℃ Relative humidity: 20-85% RH

Operating voltage: DC9V Response time: <50mS

Alarm voltage: ≥ 10V Alarm resistance: ≥ 1K ± 20%

Shell material: aluminum Shell color: silver gray

Dimensions: W40mm X H21mm X D92mm

Product use:

Connect the "monitor ground" on the OTS-LOM main unit to the device ground and connect the "Device Monitor" to the device to be monitored. Turn the power switch on when the host is powered on.

1, if the detection device exists when the induced voltage is higher than the monitor set value (factory set to 10V), the monitor red light is always issued a continuous beep and automatically enter the protection state until the induced voltage disappears after 15-60 Seconds to resume work. (Monitor recovery time depends on the intensity of the induced voltage and the sensitivity of the monitor settings)

2, if the device to be detected does not exist in the induced voltage or the induced voltage is lower than the alarm set value, the monitor will detect the device and the ground between the loop resistance, if the loop resistance within the set range (factory Set the value of 1KΩ), the monitor lights green light, the buzzer does not alarm. If the loop resistance exceeds the set range (factory setting is 1KΩ), the monitor lights red and a continuous beep sounds.

Performance Description

1, real-time monitoring of the operator's electrostatic wrist strap wear and ground access to the earth, the case of abnormal state immediately alarm.

2, easy to use, you can correctly determine the ground ground and the work of the ground contact. The following are the same as the "

3, according to the design needs, generally set to 1.068-2.0MΩ (± 5%), in line with international norms, but also ** set monitoring parameters.

4, microcomputer chip control, free debugging, plug and play. The following are the same as the "

5, good reliability, anti-interference ability.

6, high sensitivity, when the electrostatic discharge path failure ≥ 0.1 seconds, the monitor will alarm.

product structure:

About Us

Shenzhen Yong Sheng Technology Co., Ltd. is a collection research and development, production and sales as one of the professional anti-static products, clean room purification supplies and equipment company. Product quality and customer service by the industry praise. Such products are widely used in electronics, semiconductor, LCD manufacturing, PCB manufacturing, precision machinery, food processing and biochemical pharmaceutical industry. Is to protect the staff and precision components from electrostatic hazards and dust pollution of the necessary tool products.

Yong Sheng Technology has a strong R & D production capacity. R & D team dedicated to ESD network monitoring system, ESD access control system and other product development; equipment workshop mainly produces DC, AC network ion fan, ion wind snake, air gun, mouth, wrist band monitor, ESD access control system, intelligent channel Gloves production line mainly produces 13-pin PU nylon coated gloves, carbon fiber dip refers to the palm gloves, nylon gloves, gloves, gloves, anti-static gloves, etc .; is the leading domestic manufacturer.

Yong Sheng Technology established a "   ”、“  ”Brand, and further enhance the market competitiveness, product coverage of domestic and foreign Southeast Asia, Europe and other regions.